+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Quick key stock question (/showthread.php?tid=7332940)
Quick key stock question - Aram - 09-02-2017
I lost the pulley key from my YC-8J jointer. McMaster sells key stock in various grades of steel. Which type do I want?
Thanks!
RE: Quick key stock question - JGrout - 09-02-2017
(09-02-2017, 03:22 PM)Aram Wrote: I lost the pulley key from my YC-8J jointer. McMaster sells key stock in various grades of steel. Which type do I want?
Thanks!
the correct size.
do not make it difficult , go to Ace or TV and find one; it will suit the purpose just fine.
edit to add: sometimes the application demands a harder key but this is more of an issue when working with high HP /torque applications than a jointer ever sees.
RE: Quick key stock question - Aram - 09-02-2017
(09-02-2017, 03:25 PM)JGrout Wrote: the correct size.Thanks, Joe.
do not make it difficult , go to Ace or TV and find one; it will suit the purpose just fine.
edit to add: sometimes the application demands a harder key but this is more of an issue when working with high HP /torque applications than a jointer ever sees.
Found some on Amazon, Prime, cheap and fast. Should be good to go.