Posts: 4,814
Threads: 1
Joined: Jan 2004
Location: Eugene, OR
I lost the pulley key from my YC-8J jointer. McMaster sells key stock in various grades of steel. Which type do I want?
Thanks!
Best,
Aram, always learning
"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery
Web:
My woodworking photo site
Posts: 29,152
Threads: 1
Joined: Aug 2002
09-02-2017, 03:25 PM
(This post was last modified: 09-02-2017, 03:27 PM by JGrout.)
(09-02-2017, 03:22 PM)Aram Wrote: I lost the pulley key from my YC-8J jointer. McMaster sells key stock in various grades of steel. Which type do I want?
Thanks!
the correct size.
do not make it difficult , go to Ace or TV and find one; it will suit the purpose just fine.
edit to add: sometimes the application demands a harder key but this is more of an issue when working with high HP /torque applications than a jointer ever sees.
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 4,814
Threads: 1
Joined: Jan 2004
Location: Eugene, OR
(09-02-2017, 03:25 PM)JGrout Wrote: the correct size.
do not make it difficult , go to Ace or TV and find one; it will suit the purpose just fine.
edit to add: sometimes the application demands a harder key but this is more of an issue when working with high HP /torque applications than a jointer ever sees.
Thanks, Joe.
Found some on Amazon, Prime, cheap and fast. Should be good to go.
Best,
Aram, always learning
"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery
Web:
My woodworking photo site
