Posts: 3,182
Threads: 0
Joined: Sep 2004
Location: Piedmont North Carolina
(03-06-2018, 12:19 AM)Aram Wrote: Yep! I ordered brushes, collets and collet nut, and bearings from eReplacementParts. Thanks everyone.
(03-06-2018, 01:45 AM)photobug Wrote: Is this a concern for just this product or are all PC replacement parts going away?
I own 3 P-C routers (310, 690, & 890 in my router table) - have not bought any spare parts to date - the 690 is probably 20+ years old; all work fine but I'm just an occasional woodworker, so none have been abused. The only issue w/ the 310 is bit removal, i.e. I usually have to loosen the collet, then 'tap it' a few times to free up the bit shank. I've not check the brushes which would probably be my main concern - would need to do a search to see 'what' to look for -
Dave
Piedmont North Carolina
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
(03-06-2018, 01:45 AM)photobug Wrote: Is this a concern for just this product or are all PC replacement parts going away?
I heard some time back the PC310 was going away, but don't know if it did.
All of the tool co. buyouts have things messed up.
I have half a dozen of the PC7310 routers and they haven't disappeared yet. Still in production.
The PC310 was always touted as the commercial shop router in small routers.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 805
Threads: 0
Joined: Feb 2003
Location: Land of Enchantment
(03-05-2018, 10:28 AM)Aram Wrote: I have a PC 310, love it. It just occurred to me to buy a backup collet and collet nut. Any other parts I should pick up, just in case, before they become unavailable?
Thanks!
Why a collet/collet nut? I've had routers for the last 45 years and now have eight of them. I've never had to replace a collet/collet nut.
Bob
Posts: 4,814
Threads: 1
Joined: Jan 2004
Location: Eugene, OR
03-06-2018, 09:06 PM
(This post was last modified: 03-06-2018, 09:07 PM by Aram.)
(03-06-2018, 08:19 PM)BobW Wrote: Why a collet/collet nut? I've had routers for the last 45 years and now have eight of them. I've never had to replace a collet/collet nut.
Law of physics. If I don't have a spare, I will lose or break both of them.
BTW I have broken a collet in a larger router.
Best,
Aram, always learning
"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery
Web:
My woodworking photo site
