Posts: 12,884
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
Those are very nice; both the design and execution. The floor lamp is a perfect pairing for the table lamp. Well done.
John
Posts: 270
Threads: 0
Joined: Jan 2007
Location: Warrenton, MO
07-04-2020, 08:26 AM
(This post was last modified: 07-04-2020, 08:27 AM by Eurekan.)
(07-03-2020, 07:32 PM)lift mechanic Wrote: Very nice. They are on my to do list. QSWO is my favorite wood. Did you do lock miters on the legs?
I tried to do lock miter but found it is much too narrow to handle safely. I went with a modified overlap/dado. Not sure what to call it. I used my RAS to nibble out a portion of each cutout for the center. Very easy on the RAS not sure how I would have done that otherwise. Here is a badly drawn picture and an end view of the cord leg. The edges of the overlaps just disappear when the radius is complete. FWIW the table lamp has a 4deg slant and the floor lamp 2 deg.
Was living the good retired life on the Lake. Now just living retired.
Posts: 892
Threads: 0
Joined: Apr 2006
Location: Trout Creek, Montana
Never thought about doing it that way, great way to get the flake on all 4 sides. Now that you mentioned it doing the narrow pieces with a lock miter bit dangerous. I did legs for a dining room table legs with a lock miter bit but the pieces were 6" wide.
Again nice job.
Treat others as you want to be treated.
“You only live once, but if you do it right, once is enough.” — Mae West.
24- year cancer survivor
Posts: 1,618
Threads: 0
Joined: Feb 2010
Location: Coast of Maine
Super work and a very pleasing design,
g
I've only had one...in dog beers.
"You can see the stars and still not see the light"
The Eagles: Already Gone
Posts: 11,717
Threads: 0
Joined: Jan 2005
Location: North Central Illinois
Beautiful!
I have been wanting to make some A&C lamps as well
Posts: 12,197
Threads: 2
Joined: Nov 1999
Location: Nebraska City
Love the floorlamp! If you're willing to share dimensions and such shoot me a PM. One of those would be perfect for our retirement place.
Posts: 7,421
Threads: 1
Joined: Sep 2005
How do you cut mica?
No animals were injured or killed in the production of this post.
Posts: 2,386
Threads: 0
Joined: Jan 2008
Location: Irving, Tx
Great Job!!! I'm a huge fan of Arts & Craft lamps. You really nailed it. Your approach to the legs was ingenious.
"I tried being reasonable..........I didn't like it." Clint Eastwood
Posts: 314
Threads: 0
Joined: Feb 2012
Location: Carson Valley, NV
Those are really sharp looking lamps.
The leg construction is ingenious.
Posts: 270
Threads: 0
Joined: Jan 2007
Location: Warrenton, MO
I cut the mica by first using a cardboard template to fit the frame. Then I used a straight edge and a new blade in the utility knife. I slowly scored it because the mica will flake apart and will want to drag the knife off line. (in fact there is a score on one of the faces I'm not showing). I did the cut several times till it went all the way through. I tried scissors, tin snips, saws but nothing worked as well as just trying to score it. Scissors and tin snips would cause the mica to flake and come apart. If somebody has a better idea please tell me.
Was living the good retired life on the Lake. Now just living retired.
