Posts: 2,488
Threads: 0
Joined: Aug 2004
09-26-2017, 06:33 AM
(This post was last modified: 09-26-2017, 06:35 AM by Halfathumb.)
I made several zero insert for my TS, but I'm running out of those screw inserts that are for adjusting the level, etc. But I can't find them because I don't remember what they're called.
Please help an old man remember and where I can get more.
BTW. Does anyone have a method of keeping track of what they're called and where to buy them, etc.
Jim
Jim
Posts: 3,216
Threads: 0
Joined: Jan 2006
(09-26-2017, 06:33 AM)Halfathumb Wrote: I made several zero insert for my TS, but I'm running out of those screw inserts that are for adjusting the level, etc. But I can't find them because I don't remember what they're called.
Please help an old man remember and where I can get more.
BTW. Does anyone have a method of keeping track of what they're called and where to buy them, etc.
Jim
Try hex set screws.
Posts: 5,661
Threads: 1
Joined: Mar 2008
Location: Flemington, New Jersey
Hardware store, a good NAPA, McMaster - Carr for sure.
Posts: 11,703
Threads: 1
Joined: May 2014
Location: South Central Oklahoma
The first step in overcoming a problem, is admitting it exists. Lol. If you were to wander thru my workshop, you'd see wrench sizes for the various tools written neatly near the bolts. On my table saw is a small notation that says, "loosen" - with an arrow reminding me the blade retention nut is reverse threaded.
Once you find the nuts you need, write a note on the saw support for the fence: 3/16 hex nuts @ lowes. I use permament marker but it can be erased/with WD40.
Jim in Okie
You can tell a lot about the character of a man -
By the way he treats those who can do nothing for him.
Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
Flip a regular screw over and cut a slot in the end with a hacksaw and use a screwdriver. Just an option.
Posts: 5,421
Threads: 0
Joined: Jun 2001
Location: Troy IL
Life is what you make of it, change your thinking, change your life!
Don's woodshop
Posts: 4,004
Threads: 0
Joined: Apr 2002
If you buy a thousand of them, you won't need to remember what they are called or where to buy them. You'll only need to remember where you put them.
Posts: 1,028
Threads: 0
Joined: Apr 2011
Being that I tend to be a miser at times, I just use sandpaper to bring an insert down or aluminum tape to bring it up. Fast, cheap and works well for me :-)
Ray
Posts: 12,876
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
With the 1/2" thick ZCI's I make for my Unisaw I use regular screws. They work fine and are easy to install.
John
Posts: 13,411
Threads: 4
Joined: Jun 2007
Location: New Jersey
(09-26-2017, 09:08 AM)DogwoodTales Wrote: Being that I tend to be a miser at times, I just use sandpaper to bring an insert down or aluminum tape to bring it up. Fast, cheap and works well for me :-)
I shim with blue painters tape.
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
