***SOLD*** 350 bf Hard Maple slabs by the piece or $450 takes all
#20
I'd guess each slab is close to 100 pounds...at least the really big ones are and there's at least 10 of those. Purely a guess though but 1300 pounds is my conservative estimate
Alex
Final Assembly Quality Inspector for the manufacture of custom vintage sport biplanes
[Image: 07-15-28-122_512.gif]
Reply
#21
(10-22-2018, 10:25 AM)deeno Wrote: How thick are the slabs?  I am interested.

Pm received and replied. 1st in line
Alex
Final Assembly Quality Inspector for the manufacture of custom vintage sport biplanes
[Image: 07-15-28-122_512.gif]
Reply
#22
(10-20-2018, 07:20 PM)alanealane Wrote: I have to make room for the car to get back in the garage this winter. So the wood has to go 
Sigh
Zip 49224 is where it's located...pickup only. Prefer to sell all at once but will piece it out. PayPal or money order only.

It's hard Norway Maple from a tree that grew in front of the house I lived in most of my life. The compression curl is impressive in many of the slabs. The tree also produced some "angel-step" curl. The guy who milled and dried it was an amateur so there's some areas of checking, but nothing a couple bowties/butterflies can't fix.
There's approximately 350 board feet available which equates to 15 slabs. I conservatively measured each slab width at the ends and middle and here are the sizes per piece (all 2" thick rough sawn and dried for about 8 years):
Widths          Length
8,9,14            88
9,13,9            80
14,13,18        108
14,10,20        108
14,18,11        94
21,20,21        112
17,14,17        112
19,19,19        112
21,19,20        112
21,21,21        107
21,21,21        112
21,20,21        108
21,20,19        110
11,11,13        90
20,11,14        106


Here's a teaser of what many of these slabs contain but I'm keeping this one
Big Grin:
[Image: 45406392112_e7e3fb11cb_z_d.jpg]
[Image: 45406307212_a61fac6e3b_z_d.jpg]
[Image: 44733344024_da4d15547d_z_d.jpg]
Are these still available?
Reply
#23
One person ahead of you in line Brian. They're tentatively planning on coming to check them out this weekend. I'll update on the outcome
Alex
Final Assembly Quality Inspector for the manufacture of custom vintage sport biplanes
[Image: 07-15-28-122_512.gif]
Reply
#24
(10-22-2018, 02:37 PM)alanealane Wrote: One person ahead of you in line Brian. They're tentatively planning on coming to check them out this weekend. I'll update on the outcome

Thanks...please keep me posted.
Reply
#25
LOML may hurt me if I bring yet more wood home but...
[Image: follow4.jpg]
Reply
#26
(10-22-2018, 02:20 PM)Brian Chitwood Wrote: Are these still available?

(10-23-2018, 11:04 PM)Cian Wrote: LOML may hurt me if I bring yet more wood home but...
[Image: follow4.jpg]

Hey guys just wanted to let you know the wood is sold. deeno just drove away with the loot. Thanks for the interest!
Alex
Final Assembly Quality Inspector for the manufacture of custom vintage sport biplanes
[Image: 07-15-28-122_512.gif]
Reply
#27
Met Alex and his Dad yesterday.   Super nice guys.  We made it home ok with all that wood in my friends Excursion.  If your ever in my neck of the woods look me up so we can talk woodworking.   Thanks!
Reply
#28
(10-27-2018, 12:43 PM)deeno Wrote: Met Alex and his Dad yesterday.   Super nice guys.  We made it home ok with all that wood in my friends Excursion.  If your ever in my neck of the woods look me up so we can talk woodworking.   Thanks!

Sounds good man! Likewise it was nice meeting you! Have fun with all that wood
Smile
Alex
Final Assembly Quality Inspector for the manufacture of custom vintage sport biplanes
[Image: 07-15-28-122_512.gif]
Reply


Forum Jump:


Users browsing this thread: 5 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.