Posts: 587
Threads: 0
Joined: Sep 2005
Location: Bluffton SC
01-19-2022, 08:14 PM
(This post was last modified: 01-19-2022, 08:16 PM by Mike 55.)
Hi Guys,
Has anyone heard of or used
X-Series Bracket System by Century Components? They make a cool system for pantry cabinets whereby the draws are adjustable. I plan to call the local distributor as I want to see if I can just buy the system and make my own draw boxes.
This is a link to the site.
https://www.xseriesbracket.com/
https://www.centurymade.com/
Posts: 770
Threads: 0
Joined: Jan 2007
Location: ATL
Sure , you can buy just the standards with the clips and make your own boxes.
Posts: 1,747
Threads: 0
Joined: Oct 2004
What kind of slides do these work best with? I watched a video where they just dropped the drawer box onto the slide and it seems like the system might work well for retrofitting into some old cabinets I have.
Posts: 587
Threads: 0
Joined: Sep 2005
Location: Bluffton SC
01-24-2022, 10:10 AM
(This post was last modified: 01-24-2022, 10:15 AM by Mike 55.)
(01-24-2022, 12:01 AM)BillN Wrote: What kind of slides do these work best with? I watched a video where they just dropped the drawer box onto the slide and it seems like the system might work well for retrofitting into some old cabinets I have.
I'm using VP full extension draw slides. I ordered them last week and they said they will sent on Wednesday. Once I get them I will let you know. The directions seem simple. You attach the slides to the draw box as usual and the pins have threaded holes to screw in the slide to the bracket. I was going to make to make the post and just order the pins but I decided to just order them to see how they are built. I can then duplicate it for future projects.
I found another video that explains the system.
https://www.youtube.com/watch?v=Cr1wxr4WtLs
