Escondido WW help?
#10
  
Anyone in the Escondido, CA area want to make some reasonable money to help finish a project?
It basically amounts to making 16 half lap joints in 2 X 4’s: 2 stiles about 45” long and 4 rails about 7’ long.
Must be square and tight.
Thanks,
Gary
Gary

Liberty, Self-Reliance, Self-Responsibility
Say what you'll do and do what you say.
ServicePen 2014
Reply
#11
  Re: Escondido WW help? by Gary G™ (Anyone in the Escond...)
I am not in a position to be of any help, but I can suggest you try the San Diego Fine Woodworkers Association Craftsman List.

See if you can find a skills and reasonable location match on that list.
Every decision you make can be viewed as a choice between comfort and opportunity.

The Confederacy tried to tear apart the United States. The United States prevailed because it had God on its side. I don't think there's any reason to honor Satan's army.--ILED
Reply
#12
  Re: Escondido WW help? by Gary G™ (Anyone in the Escond...)
(07-06-2018, 09:36 PM)Gary G™ Wrote: Anyone in the Escondido, CA area want to make some reasonable money to help finish a project?
It basically amounts to making 16 half lap joints in 2 X 4’s: 2 stiles about 45” long and 4 rails about 7’ long.
Must be square and tight.
Thanks,
Gary

You can do those from anywhere... bundle'm up and UPS'em out there
Reply
#13
  Re: Escondido WW help? by Gary G™ (Anyone in the Escond...)
The material is already here though.
Gary

Liberty, Self-Reliance, Self-Responsibility
Say what you'll do and do what you say.
ServicePen 2014
Reply
#14
  Re: RE: Escondido WW help? by Gary G™ (The material is alre...)
(07-07-2018, 05:57 PM)Gary G™ Wrote: The material is already here though.

I thought you were in Florida.  You don't own a circular saw and a chisel?  I've also done what you want with a handsaw, though that would take longer.
Janus was a disaster, coming or going - K. L, McReynolds 07/01/2015

My blog: http://wcwoodworking.blogspot.com/
Reply
#15
  Re: Escondido WW help? by Gary G™ (Anyone in the Escond...)
My SIL didn’t have tools; we went shopping.
I’ve done 23 half lap joints—9 to go.
Most were done with circular saw, chisel and rasps.
We borrowed a router and I’m banging but it’s still hot—yesterday was 108; it’s only 102 right now!

This is me:

http://lumberjocks.com/projects/385721
Gary

Liberty, Self-Reliance, Self-Responsibility
Say what you'll do and do what you say.
ServicePen 2014
Reply
#16
  Re: Escondido WW help? by Gary G™ (Anyone in the Escond...)
Still looking for someone who can complete 4 easy sets of half lap joints in Escondido.
Anyone know someone who wants to make a couple hundred dollars for a few hours work?
Gary

Liberty, Self-Reliance, Self-Responsibility
Say what you'll do and do what you say.
ServicePen 2014
Reply
#17
  Re: Escondido WW help? by Gary G™ (Anyone in the Escond...)
Small set of chisels, circular saw, and Amazon Prime?
-brew
Reply
#18
  Re: Escondido WW help? by Gary G™ (Anyone in the Escond...)
Don’t understand your reply?!?j
Gary

Liberty, Self-Reliance, Self-Responsibility
Say what you'll do and do what you say.
ServicePen 2014
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)