Commendable cause and effort on your part Bones. What's your route going to be for this haul?

Looks like some good stuff. Are you taking orders or bringing the whole lot with you?

How small of an order will you take?

I've been toying with some new ideas for my sled ever since I made the last one. Getting together with TwoBye last week to build his gave me the mental push I needed to go ahead and make a new updated version.

Here's the new one and I'll explain the upgrades but the basics first: Sled base is 3/4" Baltic Birch Ply. All other wood is some Paduak I had out in the tent. Tracks are all from Incra.

Ok, here's an over all shot. Pretty much the same layout as the old one.





Now....... some of the improvements I decided to make with this one.

First...... I've almost completely cut through the safety block on my old one. All the little cuts into the block every day gradually make it through. For this sled, I made the safety block moveable. When I start to cut through it I'll slide it over for a fresh spot. When I don't have any fresh spots left, I can simply install a new one.





The zero clearance inserts are still here, but I've added a moveable section of the fence to allow for a constant ZCI at the rear of the cut as well. In this pic, I have the 1/2" insert in and the fence section is locked into place to match the cutting path.




I don't cross cut a ton of large pannels so the distance from fence to fence hasn't changed on this version, but I was always finding myself needing to move the stop block further to the left than I had fence to move it. I also didn't want a super long sled, so I added a telescoping section to the fence. Normally I have 22" to the left of the blade - but with the fence section extended I now have up to 36" to the left. There's a hex bolt tucked down through the upper scale that locks the lower one in place..






I added a secondary hold down t-track as well. Now one on each side of the blade. The track on the left is closer to the blade than on my old sled because the hold down wasn't reaching some pieces.





Lastly, I added a miter fence. I may not use it much becuse I alredy have a good Incra, but figured the ability to keep things on the sled might be worth while. There's a threaded insert that one end of the fence attaches to.



The other end of the fence is guided by a T-slot. The T-bolt for the knob can be removed at an opening near the rear fence.



With the shorter front fence I have almost 90* of swing for the miter fence. If I end up using it a bunch, I'll add a stop block to it.






So there it is........ my latest sled. I really enjoy making jigs for the shop and my sleds have become a sort of "flag ship" for me..

Thanks for taking a look. Now it's time to start planing for the next one.

I have tried to send pictures but for some reason it always says something about the java script doesn't work.HELP

From General's website:

Quote:

---

This warranty does not apply to items that would normally be consumed or require replacement due to normal wear such as blades, lubricants, belts, electric motors and electric components.

---

Excellent write-up jarhead. Very informative. It will really help me (a furnituremaking newbie) out in future projects. Thank you for sharing!!

Regards,

Ed

Sorry. forgot to mention excellent work too!

The guidelines for posting strongly suggest that you include a price.

This is my all time Favorite:



it's Chris Beckvoort's Cabinet.

Good luck on choosing and building your tool cabinet.

John

log in button still not fixed since your new "front page" for the web sight

This forum's search feature may return confusing results for you if you use more than one word. This is because by default, searching for several words will return results with any of those words in it. So searching for router table will return posts that have the word "router" in it as well as posts that have the word "table". This is not very useful!

So, to solve this problem, you can require that all of your search terms appear in the same post. To do this, you add a plus sign (+) directly before the word, like so:

Code:

+router +table